Propper Defender Police Uniform Jackets

Propper Defender Gamma Jacket

The Gamma Jacket is a full cut, full-length model with two-way zipper front and provision for zip-in liner (in combination w the Propper Echo F5474 Softshell Jacket). The jacket’s nylon shell fabric has a waterproof/breathable barrier throughout the body, sleeves, and collar, and is fully factory seam-sealed. The jacket is completely lined for a clean finish.

• HALT™ barrier, two-layer waterproof-breathable performance coating system
• Extended drop tail for added rain protection
• Exclusive Peripheral Vision Hood System (PVHS)
• Factory seam-sealed for superior water protection and insulation
• Access between shell and lining for attachment of embroidered patches
• Designed to accept the Echo Softshell liner for added insulation and versatility
• Top and side-entry cargo pockets at the hips with secured top flaps
• Highly durable nylon shell with DWR finish
• Super light-weight
• Less water uptake and faster dry time due to DWR finish
• YKK zippers throughout with anti-corrosive zipper sliders
• Two-way YKK front zipper closure with interior storm flap
• Adjustable, elastic cuffs include rubber-molded, dull black cuff tabs with two-snap adjustment (more durable closure than hook and loop)
• Quieter shell fabrics compared to competitor products
• Custom, molded badge tab on the left chest accepts standard law enforcement badges with a secure and tight fit
• Military-inspired, four-slot epaulets
• Two, chest-high microphone tabs
• Law enforcement colors: LAPD Navy, Black

Exterior Shell Materials All jackets in the line except for the Echo Softshell and the Halo I Hi-Vis rain jacket, have a durable nylon shell that is coated with a Durable Water Repellency (DWR) finish. The DWR coating helps ensure the jackets have less water uptake and provide faster dry time. The DWR coating keeps the water from soaking into the face fabrics of the jacket. The exceptions to the Nylon shell fabric are the shells for the Echo Softshell and the Halo I Rain Jacket. The Echo Softshell has a 100% polyester stretch-woven face and lining with a 100% polyester fleece interior lining. The Halo I Rain Jacket outer shell (i.e. the Hi-Vis yellow fabric) is 100% polyester. This is also true for the hi-vis yellow side of the Halo II reversible jacket, which is also 100% polyester HALT™ (Highly Advanced Laminate Technology).

Barrier Layered Waterproof-Breathable Construction The Propper Defender™ HALT™ barrier achieves waterproof-breathable performance in two ways, depending on the jacket. Three of the jackets in the line have a three-layer laminate membrane system and three of the jackets have a two-layer system. The Bravo “Ike” Duty Jacket, the Halo I Hi-Vis Rain Jacket with Drop Tail and the Delta Drop Panels use a three-layer laminate system to achieve waterproof-breathable performance.

Three-layer Laminate Membrane System The 3-in-1 laminate membrane design uses a highly advanced laminate system to achieve waterproof, breathable performance. The three layers in the laminate membrane system consist of 1)The outside nylon shell (polyester shell for the Hi Vis); 2)Polyester Film laminate; 3)Nylon tricot backer knit.

Two-Layer System The Alpha Classic Duty Jacket, the Gamma Long Rain Jacket with Droptail and the Halo II Hi-Vis Reversible Duty Jacket have a Two-layer performance coating system to achieve waterproof breathable performance. The layers in this system include 1)The outside nylon shell; 2)Polyurethane-based hydrophobic coating on the nylon; 3)100% nylon interior lining on the Alpha Classic Duty Jacket and the Gamma Long Rain jacket, the Halo II Reversible does not have a lining since the Hi Vis side is the lining (nylon outside, polyester Hi-Vis side).

It should be noted that both HALT systems, the three-layer laminate membrane and the two-layer hydrophobic coating system, provide excellent waterproof-breathable performance, and are both fully factory seam-sealed.

Propper Defender Halo II Jacket

The Halo-II Jacket is a full cut, waist-length model with reversible feature for Hi-Vis safety requirements, zipper front and elasticized waistband. The jacket’s nylon shell fabric has a waterproof/breathable barrier throughout the body, sleeves, and collar, and is fully factory seam-sealed. The jacket is completely lined w Hi-Vis Safety Yellow 100% polyester for a clean finish. This jacket is ANSI 107-2004 Class 3 Certified for high-visibility apparel.

• HALT Barrier, 2-layer waterproof-breathable Performance Coating system
• Black or LAPD Navy durable nylon outer shell reverses to polyester Hi-Vis Yellow shell with reflective tape
• ANSI 107-2004 Class 3 Certified for high visibility apparel
• Reflective 360 degree tape along the chest and hip and at the same height on the sleeves
• Exclusive Peripheral Vision Hood System (PVHS)
• Angled and zippered side pockets for quick access
• Side zippers with security snap tabs allow access to duty belt and weapon
• Super light-weight
• Less water take-up and quicker dry time due to DWR finish
• Factory seam-sealed for superior waterproofness and insulation
• YKK zippers throughout with anti-corrosive zipper sliders
• Adjustable, elastic cuffs include rubber-molded, dull black cuff tabs with two-snap adjustment (more durable closure than hook and loop)
• Quieter shell fabrics compared to competitor products
• Access between shell and lining for attachment of embroidered patches
• Custom, molded badge tab on the left chest accept standard law enforcement badges with a secure and tight fit
• Military-inspired, four-slot epaulets on the outer shell
• Two chest-high microphone tabs on the interior, Hi-Vis side
• Law Enforcement colors: LAPD Navy, Black (reverses to Hi-Vis Yellow)

Exterior Shell Materials All jackets in the line except for the Echo Softshell and the Halo I Hi-Vis rain jacket, have a durable nylon shell that is coated with a Durable Water Repellency (DWR) finish. The DWR coating helps ensure the jackets have less water uptake and provide faster dry time. The DWR coating keeps the water from soaking into the face fabrics of the jacket. The exceptions to the Nylon shell fabric are the shells for the Echo Softshell and the Halo I Rain Jacket. The Echo Softshell has a 100% polyester stretch-woven face and lining with a 100% polyester fleece interior lining. The Halo I Rain Jacket outer shell (i.e. the Hi-Vis yellow fabric) is 100% polyester. This is also true for the hi-vis yellow side of the Halo II reversible jacket, which is also 100% polyester HALT™ (Highly Advanced Laminate Technology).

Barrier Layered Waterproof-Breathable Construction The Propper Defender™ HALT™ barrier achieves waterproof-breathable performance in two ways, depending on the jacket. Three of the jackets in the line have a three-layer laminate membrane system and three of the jackets have a two-layer system. The Bravo “Ike” Duty Jacket, the Halo I Hi-Vis Rain Jacket with Drop Tail and the Delta Drop Panels use a three-layer laminate system to achieve waterproof-breathable performance.

Three-layer Laminate Membrane System The 3-in-1 laminate membrane design uses a highly advanced laminate system to achieve waterproof, breathable performance. The three layers in the laminate membrane system consist of 1)The outside nylon shell (polyester shell for the Hi Vis); 2)Polyester Film laminate; 3)Nylon tricot backer knit.

Two-Layer System The Alpha Classic Duty Jacket, the Gamma Long Rain Jacket with Droptail and the Halo II Hi-Vis Reversible Duty Jacket have a Two-layer performance coating system to achieve waterproof breathable performance. The layers in this system include 1)The outside nylon shell; 2)Polyurethane-based hydrophobic coating on the nylon; 3)100% nylon interior lining on the Alpha Classic Duty Jacket and the Gamma Long Rain jacket, the Halo II Reversible does not have a lining since the Hi Vis side is the lining (nylon outside, polyester Hi-Vis side).

It should be noted that both HALT systems, the three-layer laminate membrane and the two-layer hydrophobic coating system, provide excellent waterproof-breathable performance, and are both fully factory seam-sealed.

Propper Defender Delta Jacket

The Propper Defender™ Delta Drop-Panel Jacket is a full cut, waist length model with detachable, interchangeable reflective drop panels for high-visibility, official identification, zipper front and elasticized waistband. The jacket’s nylon shell fabric has a waterproof/breathable laminate barrier throughout the body, sleeves, collar and hood, and is fully factory seam-sealed. The jacket’s shell is constructed from a military-inspired three-layer fabric laminate. Drop panels are sold separately.

• HALT™ barrier, military-inspired, ultralight 3-in-1 laminate membrane design for superior waterproofness and breathability
• Less bulk for enhanced movement and performance
• Integrated compartments on front and back (two front, one back) to store zipper-attached service Identification panels
• Compartments have hook and loop top flap for quick deploy of ID panels and zippered side pockets for covert storage
• Police, sheriff and FIRE identification panels can be ordered as an option
• Angled and zippered side pockets for quick access
• Exclusive Peripheral Vision Hood System (PVHS)
• Designed to accommodate the Echo Softshell Jacket as a liner for added insulation and versatility
• Highly durable nylon shell with DWR finish
• Super light-weight
• Less water uptake and faster dry time due to DWR finish
• Factory seam-sealed for superior waterproofness and insulation
• YKK zippers throughout with anti-corrosive zipper sliders
• Two-way YKK front zipper closure
• Adjustable, elastic cuffs include rubber-molded, dull black cuff tabs with two-snap adjustment (more durable closure than hook and loop)
• Thermo adhesive patches supplied for sealing sewn-on embroidered patches
• Side access zippers with security snap tab(s) allow access to duty belt/weapon
• Custom, molded badge tab on the left chest accepts standard law enforcement badges with a secure and tight fit
• Military-inspired, four-slot epaulets
• Law enforcement colors: LAPD Navy, Black

Exterior Shell Materials All jackets in the line except for the Echo Softshell and the Halo I Hi-Vis rain jacket, have a durable nylon shell that is coated with a Durable Water Repellency (DWR) finish. The DWR coating helps ensure the jackets have less water uptake and provide faster dry time. The DWR coating keeps the water from soaking into the face fabrics of the jacket. The exceptions to the Nylon shell fabric are the shells for the Echo Softshell and the Halo I Rain Jacket. The Echo Softshell has a 100% polyester stretch-woven face and lining with a 100% polyester fleece interior lining. The Halo I Rain Jacket outer shell (i.e. the Hi-Vis yellow fabric) is 100% polyester. This is also true for the hi-vis yellow side of the Halo II reversible jacket, which is also 100% polyester HALT™ (Highly Advanced Laminate Technology).

Barrier Layered Waterproof-Breathable Construction The Propper Defender™ HALT™ barrier achieves waterproof-breathable performance in two ways, depending on the jacket. Three of the jackets in the line have a three-layer laminate membrane system and three of the jackets have a two-layer system. The Bravo “Ike” Duty Jacket, the Halo I Hi-Vis Rain Jacket with Drop Tail and the Delta Drop Panels use a three-layer laminate system to achieve waterproof-breathable performance.

Three-layer Laminate Membrane System The 3-in-1 laminate membrane design uses a highly advanced laminate system to achieve waterproof, breathable performance. The three layers in the laminate membrane system consist of 1)The outside nylon shell (polyester shell for the Hi Vis); 2)Polyester Film laminate; 3)Nylon tricot backer knit.

Two-Layer System The Alpha Classic Duty Jacket, the Gamma Long Rain Jacket with Droptail and the Halo II Hi-Vis Reversible Duty Jacket have a Two-layer performance coating system to achieve waterproof breathable performance. The layers in this system include 1)The outside nylon shell; 2)Polyurethane-based hydrophobic coating on the nylon; 3)100% nylon interior lining on the Alpha Classic Duty Jacket and the Gamma Long Rain jacket, the Halo II Reversible does not have a lining since the Hi Vis side is the lining (nylon outside, polyester Hi-Vis side).

It should be noted that both HALT systems, the three-layer laminate membrane and the two-layer hydrophobic coating system, provide excellent waterproof-breathable performance, and are both fully factory seam-sealed.

Propper Defender Bravo Jacket

The Bravo Jacket is a full cut, short-waist length model with a premium zip-out quilted, insulated liner, zipper front and elastic waistband. The jacket’s nylon shell fabric has a waterproof/breathable laminate barrier throughout the body, sleeves, collar and hood, and is fully factory seam-sealed. The jacket shell is constructed from a military-inspired three-layer fabric laminate.

• HALT™ barrier, military-inspired, ultralight 3-in-1 laminate membrane design for superior water protection and breathability
• Less bulk for enhnaced movement and performance
• Fits above duty belt for quick, easy access
• Exclusive Peripheral Vision Hood System (PVHS)
• Includes removable, fleece-lined, quilted, insulated liner with detachable sleeves to convert into a liner vest for a cooler option. The liner is constructed of 100% polyester fleece in a ripstop weave.
• Angled and zippered side pockets for quick access
• Highly durable nylon shell with DWR finish
• Super light-weight
• Less water uptake and faster dry time due to DWR finish
• Factory seam-sealed for superior water protection and insulation
• YKK zippers throughout with anti-corrosive zipper sliders
• Adjustable, elastic cuffs include rubber-molded, dull black cuff tabs with two-snap adjustment (more durable closure than hook and loop)
• Custom, molded badge tab on the left chest accepts standard law enforcement badges with a secure and tight fit
• Epaulets with rubber-molded snap
• Law enforcement colors: LAPD Navy, Black

Exterior Shell Materials All jackets in the line except for the Echo Softshell and the Halo I Hi-Vis rain jacket, have a durable nylon shell that is coated with a Durable Water Repellency (DWR) finish. The DWR coating helps ensure the jackets have less water uptake and provide faster dry time. The DWR coating keeps the water from soaking into the face fabrics of the jacket. The exceptions to the Nylon shell fabric are the shells for the Echo Softshell and the Halo I Rain Jacket. The Echo Softshell has a 100% polyester stretch-woven face and lining with a 100% polyester fleece interior lining. The Halo I Rain Jacket outer shell (i.e. the Hi-Vis yellow fabric) is 100% polyester. This is also true for the hi-vis yellow side of the Halo II reversible jacket, which is also 100% polyester HALT™ (Highly Advanced Laminate Technology).

Barrier Layered Waterproof-Breathable Construction The Propper Defender™ HALT™ barrier achieves waterproof-breathable performance in two ways, depending on the jacket. Three of the jackets in the line have a three-layer laminate membrane system and three of the jackets have a two-layer system. The Bravo “Ike” Duty Jacket, the Halo I Hi-Vis Rain Jacket with Drop Tail and the Delta Drop Panels use a three-layer laminate system to achieve waterproof-breathable performance.

Three-layer Laminate Membrane System The 3-in-1 laminate membrane design uses a highly advanced laminate system to achieve waterproof, breathable performance. The three layers in the laminate membrane system consist of 1)The outside nylon shell (polyester shell for the Hi Vis); 2)Polyester Film laminate; 3)Nylon tricot backer knit.

Two-Layer System The Alpha Classic Duty Jacket, the Gamma Long Rain Jacket with Droptail and the Halo II Hi-Vis Reversible Duty Jacket have a Two-layer performance coating system to achieve waterproof breathable performance. The layers in this system include 1)The outside nylon shell; 2)Polyurethane-based hydrophobic coating on the nylon; 3)100% nylon interior lining on the Alpha Classic Duty Jacket and the Gamma Long Rain jacket, the Halo II Reversible does not have a lining since the Hi Vis side is the lining (nylon outside, polyester Hi-Vis side).

It should be noted that both HALT systems, the three-layer laminate membrane and the two-layer hydrophobic coating system, provide excellent waterproof-breathable performance, and are both fully factory seam-sealed.

Propper Defender Alpha Jacket

The Alpha Jacket is a full cut, waist-length model with zip-out quilted, insulated liner, zipper front and elasticized waistband. The jacket’s nylon shell fabric has a waterproof/breathable barrier throughout the body, sleeves, and collar, and will be fully factory seam-sealed. The jacket is completely lined for a clean finish.

• HALT™ Barrier, Two-layer waterproof-breathable performance coating system
• Three-piece, articulated sleeves for “action fit” motion
• Highly durable nylon shell with DWR finish
• Includes removable, quilted insulated liner with zip-off, detachable sleeves to convert into a liner vest for a cooler option. The liner provides complete body coverage, no gaps on the sides, with zippers on each side. The liner in the Alpha duty jacket is constructed of 100% polyester ripstop, and uses a polyester insulation.
• Side access zippers with security snap tabs allow access to duty belt and weapon
• Super light-weight
• Less water uptake and faster dry time due to DWR finish
• Factory seam-sealed for superior water protection and insulation
• Access between shell and lining for attachment of embroidered patches
• YKK zippers throughout with anti-corrosive zipper sliders
• Adjustable, elastic cuffs include rubber-molded, dull black cuff tabs with two-snap adjustment (more durable closure than hook and loop)
• Top and side-entry cargo pockets at the hips with secured top flap
• Quieter shell fabrics compared to competitor products
• Custom, molded badge tab on the left chest accepts standard law enforcement badges with a secure and tight fit
• Military-inspired epaulets with rubber-molded snap caps
• Law enforcement colors: LAPD Navy, Black

Exterior Shell Materials All jackets in the line except for the Echo Softshell and the Halo I Hi-Vis rain jacket, have a durable nylon shell that is coated with a Durable Water Repellency (DWR) finish. The DWR coating helps ensure the jackets have less water uptake and provide faster dry time. The DWR coating keeps the water from soaking into the face fabrics of the jacket. The exceptions to the Nylon shell fabric are the shells for the Echo Softshell and the Halo I Rain Jacket. The Echo Softshell has a 100% polyester stretch-woven face and lining with a 100% polyester fleece interior lining. The Halo I Rain Jacket outer shell (i.e. the Hi-Vis yellow fabric) is 100% polyester. This is also true for the hi-vis yellow side of the Halo II reversible jacket, which is also 100% polyester HALT™ (Highly Advanced Laminate Technology).

Barrier Layered Waterproof-Breathable Construction The Propper Defender™ HALT™ barrier achieves waterproof-breathable performance in two ways, depending on the jacket. Three of the jackets in the line have a three-layer laminate membrane system and three of the jackets have a two-layer system. The Bravo “Ike” Duty Jacket, the Halo I Hi-Vis Rain Jacket with Drop Tail and the Delta Drop Panels use a three-layer laminate system to achieve waterproof-breathable performance.

Three-layer Laminate Membrane System The 3-in-1 laminate membrane design uses a highly advanced laminate system to achieve waterproof, breathable performance. The three layers in the laminate membrane system consist of 1)The outside nylon shell (polyester shell for the Hi Vis); 2)Polyester Film laminate; 3)Nylon tricot backer knit.

Two-Layer System The Alpha Classic Duty Jacket, the Gamma Long Rain Jacket with Droptail and the Halo II Hi-Vis Reversible Duty Jacket have a Two-layer performance coating system to achieve waterproof breathable performance. The layers in this system include 1)The outside nylon shell; 2)Polyurethane-based hydrophobic coating on the nylon; 3)100% nylon interior lining on the Alpha Classic Duty Jacket and the Gamma Long Rain jacket, the Halo II Reversible does not have a lining since the Hi Vis side is the lining (nylon outside, polyester Hi-Vis side).

It should be noted that both HALT systems, the three-layer laminate membrane and the two-layer hydrophobic coating system, provide excellent waterproof-breathable performance, and are both fully factory seam-sealed.

Propper Defender Echo Jacket

The Propper Defender Echo is an advanced and versatile, contemporary-designed softshell jacket made of 95% polyester and 5% spandex fabric. It’s 100% polyester-fleece backing makes it an excellent insulating liner for the Propper Defender Delta Drop-Panel Jacket, Gamma Long-Rain Duty Jacket and Halo I Hi-Vis Rain Jacket. It features a water-resistant, windproof and breathable barrier, articulated sleeves, integrated pen pocket and badge patch, side access zippers for access to duty belt/weapon, and zippered exterior and interior chest pockets.

• Advanced and versatile, contemporary design with 95% polyester/ 5% spandex stretch-woven shell and 100% polyester fleece-backing fabric makes excellent insulating liner or a stylish, mid-weight stand-alone shell
• The Echo soft shell can be used as a liner for added warmth in the Propper Delta Drop Panel Jacket, Gamma Long Rain Duty Jacket and the Halo I Hi-Vis Rain Jacket
• Water resistant, windproof and breathable barrier
• Teflon® fluorocarbon water and stain repellent finish
• New contemporary design for law enforcement
• Articulated sleeves and elbows for “action fit” motion
• Durable stretch-woven polyester surface is resistant to abrasion and tears
• Integrated pen pocket and badge patch
• Side access zippers allow access to duty belt and weapon
• Zippered exterior and interior chest pockets
• Law enforcement color: Black

Exterior Shell Materials All jackets in the line except for the Echo Softshell and the Halo I Hi-Vis rain jacket, have a durable nylon shell that is coated with a Durable Water Repellency (DWR) finish. The DWR coating helps ensure the jackets have less water uptake and provide faster dry time. The DWR coating keeps the water from soaking into the face fabrics of the jacket. The exceptions to the Nylon shell fabric are the shells for the Echo Softshell and the Halo I Rain Jacket. The Echo Softshell has a 100% polyester stretch-woven face and lining with a 100% polyester fleece interior lining. The Halo I Rain Jacket outer shell (i.e. the Hi-Vis yellow fabric) is 100% polyester. This is also true for the hi-vis yellow side of the Halo II reversible jacket, which is also 100% polyester HALT™ (Highly Advanced Laminate Technology).

Barrier Layered Waterproof-Breathable Construction The Propper Defender™ HALT™ barrier achieves waterproof-breathable performance in two ways, depending on the jacket. Three of the jackets in the line have a three-layer laminate membrane system and three of the jackets have a two-layer system. The Bravo “Ike” Duty Jacket, the Halo I Hi-Vis Rain Jacket with Drop Tail and the Delta Drop Panels use a three-layer laminate system to achieve waterproof-breathable performance.

Three-layer Laminate Membrane System The 3-in-1 laminate membrane design uses a highly advanced laminate system to achieve waterproof, breathable performance. The three layers in the laminate membrane system consist of 1)The outside nylon shell (polyester shell for the Hi Vis); 2)Polyester Film laminate; 3)Nylon tricot backer knit.

Two-Layer System The Alpha Classic Duty Jacket, the Gamma Long Rain Jacket with Droptail and the Halo II Hi-Vis Reversible Duty Jacket have a Two-layer performance coating system to achieve waterproof breathable performance. The layers in this system include 1)The outside nylon shell; 2)Polyurethane-based hydrophobic coating on the nylon; 3)100% nylon interior lining on the Alpha Classic Duty Jacket and the Gamma Long Rain jacket, the Halo II Reversible does not have a lining since the Hi Vis side is the lining (nylon outside, polyester Hi-Vis side).

It should be noted that both HALT systems, the three-layer laminate membrane and the two-layer hydrophobic coating system, provide excellent waterproof-breathable performance, and are both fully factory seam-sealed.

Propper Defender Halo I Jacket

The Halo-I Jacket is a full cut, full-length model with two-way zipper front and provision for zip-in liner (in combination with the Propper Echo F5474 Softshell Jacket). The jacket’s nylon shell fabric has a waterproof/breathable laminate barrier throughout the body, sleeves, collar and hood, and is fully factory seam-sealed. The jacket’s shell is constructed from a military-inspired three-layer fabric laminate. This jacket is ANSI 107-2004 Class 3 Certified for high-visibility apparel.

• HALT™ barrier, military-inspired, ultralight 3-in-1 laminate membrane design for superior water protection and breathability
• Less bulk for a better fit that enhances movement and performance
• Durable, Polyester Hi-Vis Yellow shell fabric with reflective tape
• ANSI 107-2004 Class 3 Certified for high visibility apparel
• Extended drop tail for added rain protection
• Exclusive Peripheral Vision Hood System (PVHS)
• Top and side-entry cargo pockets at the hips with secured top flaps
• Side access zippers with security snap tabs allow access to duty belt and weapon
• Designed to accept Echo softshell liner for added insulation, versatility
• Super light-weight
• Less water uptake and faster dry time due to DWR coating
• Factory seam-sealed for superior water protection and insulation
• YKK zippers throughout with anti-corrosive zipper sliders
• Two-way YKK front zipper closure
• Adjustable, elastic cuffs include rubber-molded, dull black cuff tabs with two-snap adjustment (more durable closure than hook and loop)
• Quieter shell fabrics compared to competitor products
• Custom, molded badge tabs on the left chest accept standard law enforcement badges with a secure and tight fit
• Military-inspired epaulets with rubber-molded snap caps
• Two chest-high microphone tabs
• Hi-Vis Yellow color with reflective tape

Exterior Shell Materials All jackets in the line except for the Echo Softshell and the Halo I Hi-Vis rain jacket, have a durable nylon shell that is coated with a Durable Water Repellency (DWR) finish. The DWR coating helps ensure the jackets have less water uptake and provide faster dry time. The DWR coating keeps the water from soaking into the face fabrics of the jacket. The exceptions to the Nylon shell fabric are the shells for the Echo Softshell and the Halo I Rain Jacket. The Echo Softshell has a 100% polyester stretch-woven face and lining with a 100% polyester fleece interior lining. The Halo I Rain Jacket outer shell (i.e. the Hi-Vis yellow fabric) is 100% polyester. This is also true for the hi-vis yellow side of the Halo II reversible jacket, which is also 100% polyester HALT™ (Highly Advanced Laminate Technology).

Barrier Layered Waterproof-Breathable Construction The Propper Defender™ HALT™ barrier achieves waterproof-breathable performance in two ways, depending on the jacket. Three of the jackets in the line have a three-layer laminate membrane system and three of the jackets have a two-layer system. The Bravo “Ike” Duty Jacket, the Halo I Hi-Vis Rain Jacket with Drop Tail and the Delta Drop Panels use a three-layer laminate system to achieve waterproof-breathable performance.

Three-layer Laminate Membrane System The 3-in-1 laminate membrane design uses a highly advanced laminate system to achieve waterproof, breathable performance. The three layers in the laminate membrane system consist of 1)The outside nylon shell (polyester shell for the Hi Vis); 2)Polyester Film laminate; 3)Nylon tricot backer knit.

Two-Layer System The Alpha Classic Duty Jacket, the Gamma Long Rain Jacket with Droptail and the Halo II Hi-Vis Reversible Duty Jacket have a Two-layer performance coating system to achieve waterproof breathable performance. The layers in this system include 1)The outside nylon shell; 2)Polyurethane-based hydrophobic coating on the nylon; 3)100% nylon interior lining on the Alpha Classic Duty Jacket and the Gamma Long Rain jacket, the Halo II Reversible does not have a lining since the Hi Vis side is the lining (nylon outside, polyester Hi-Vis side).

It should be noted that both HALT systems, the three-layer laminate membrane and the two-layer hydrophobic coating system, provide excellent waterproof-breathable performance, and are both fully factory seam-sealed.